Garden Fencing Greasby

Removing the Rotten Fence

The first step was to take down the old fencing. Rotten timber can look reasonably sound from a distance but become weak around the posts, rails and lower edges. We removed the affected sections so the new fence could be installed on a clear boundary line.

With the old materials out of the way, we could assess the available space and plan the position of each new section. The gate area needed particular attention. A gate has to open and close reliably, so the opening, supporting structure and adjoining fencing all need to work together.

We also cleared the working area along the fence line before fitting the replacement. This made room for the new posts and helped us check the ground levels and panel positions.

Concrete Posts and Gravel Boards

We chose concrete posts to support the main run of fencing. They provide a firm structure for the panels and will not rot at ground level in the way timber posts can. Each post was positioned and checked so the panels would sit neatly along the boundary.

We fitted gravel boards beneath the feather edge panels. These create a tidy base and help keep the bottom of the timber away from direct contact with damp ground. They also give the fence a consistent finish where the ground level changes slightly.

Together, the concrete posts and gravel boards provide a practical framework for a garden boundary. If an individual panel is damaged in future, a panel-based system can also make replacement more straightforward than rebuilding the entire fence.

Fitting the Feather Edge Panels

The main sections use 1800 mm × 1800 mm feather edge panels. Their overlapping boards create a solid boundary, giving the garden greater privacy than an open fencing style. The timber provides a warm appearance, while the concrete posts and gravel boards give the installation clear, even lines.

We checked the fit and alignment of the panels as the work progressed. A fence can have good materials but still look untidy if the sections sit at different heights or the posts are out of line. Taking time over the layout helped the finished fence look like one coordinated installation.

Building Around the Lockable Gate

The gate opening did not call for another full-sized panel. To make the fencing fit properly, we built a smaller section using cross and rail construction with feather edge boards. This bespoke section allowed us to work to the available width and bring the same timber appearance through to the gate area.

The lockable gate gives the customer a more secure point of access to the garden. Its position was planned alongside the adjoining fence so the opening would be practical to use and the finished boundary would look complete. The custom-built section is a useful example of why fencing sometimes needs more than a row of standard panels: the best result comes from adapting the construction to the actual space.

The Finished Result

The new fencing has replaced a rotten, tired boundary with one that feels solid, private and much better suited to the garden. The feather edge panels screen the space, the gravel boards protect the lower edges of the timber, and the concrete posts provide durable support. Around the gate, the smaller cross and rail section creates a neat transition without leaving an awkward gap or forcing in a panel that does not fit.

Most importantly for the customer, the garden now has a lockable access point and a consistent boundary. The combination of standard panels and a bespoke section allowed us to meet the practical requirements of the site while giving the whole installation a smart, unified appearance.

This Greasby job shows the value of planning every part of a fence, especially where a gate interrupts the boundary. The finished result is a garden that looks tidier, feels more private and is easier to secure.

We install garden fencing, replace damaged sections, repair posts and panels, and fit gates suited to the opening. Whether you have a short boundary beside a driveway or fencing around an entire rear garden, we start with the condition of the site and what you need the boundary to do.

What Is Your Fence Telling You?

A fence can look tired without being beyond repair. Conversely, a fresh panel attached to unstable posts may not last. These common symptoms help explain where to start:

• One broken panel: If the surrounding posts are secure and the size is suitable, a panel replacement may be enough.
• Several panels moving together: The posts or their foundations may need attention.
• A fence leaning along its length: Replacing boards alone is unlikely to correct the alignment.
• Timber touching wet soil: Rot can spread at the bottom of boards and posts, making future failures more likely.
• A gate that no longer lines up: Check its hinges, frame and supporting post before buying a new gate.

We can examine the affected section, explain the likely cause and suggest a practical scope of work. You should know whether a quote covers a repair, a partial replacement or a complete new fence.

New Fencing for Everyday Life

The best fence for your garden depends on more than its appearance. Think about where people sit, which route children or pets use, how much privacy you want and whether a neighbouring tree or raised bed limits access. We use those details to recommend a sensible height, layout and style.

Options we can discuss include:

• Featherboard fencing for a solid, traditional boundary.
• Timber fence panels for a neat, sectional layout.
• Concrete posts and gravel boards where a durable support system is appropriate.
• Timber posts where they better suit the look or construction of the garden.
• Replacement fencing that connects cleanly to a sound existing section.
• A matching garden gate to finish a side entrance or rear path.

Some gardens need a continuous fence line; others benefit from dividing a long run into manageable sections. Changes in ground height, corners and narrow access can alter the installation method. We plan around those details rather than forcing a standard arrangement into an awkward space.

Greasby and Frankby: Make the Most of the Garden

A fence should make the garden easier to use. In Greasby and Frankby, customers may want a private place to sit, a clearer boundary around planting or a secure route from the house to the side gate. The right layout can achieve that without making the space feel boxed in.

For example, a solid rear fence might provide the screening you want, while a lower front section preserves an open feel. If your existing fencing is sound in places, replacing only the weak run may be a sensible choice. We can talk through how the old and new sections will meet, so the result looks considered.

Merseyside Fencing’s founder, Mark McCabe, lives in Greasby and has called the village home for over 40 years. His longstanding connections with the local community mean this area is more than a place on our coverage list. When you contact us about a fence in Greasby, you are speaking to a business with genuine roots here.

Irby and Upton: Repairs, Replacements and Access

In Irby and Upton, we also help with the jobs that are easy to put off: a loose corner post, a panel held in place temporarily, or a side gate that bangs against its frame. These are everyday problems, but they can affect security and become more disruptive in poor weather.

Access matters when planning the work. Let us know if materials must pass through a narrow passage, if the fence backs onto a driveway or if paving and planting need protecting nearby. We can account for those constraints when arranging a visit and preparing the quotation.

Fence Repairs Without Guesswork

A good repair deals with the part that failed. Screwing a loose panel to a rotten post may make it look steady briefly, but it will not restore a reliable boundary. Equally, replacing an entire fence because one component broke can be unnecessary.

Our repair work may involve replacing a damaged panel, addressing a failed post, securing loose components or renewing a short section. What is possible depends on the condition and compatibility of the remaining fence. We will explain any limits before you agree to the work.

After storm damage, photographs are useful for an initial conversation. Include a wide shot of the whole run and a closer view of damaged posts or fixings. Keep clear of sections that could fall, and tell us if the boundary needs urgent attention.

Gates That Open, Close and Fit Properly

A gate should be easy to use with one hand, clear the ground and latch reliably. If yours catches, sags or swings open unexpectedly, the gate leaf may not be the only issue. Hinges, posts and ground movement can all affect how it operates.

We can assess an existing gate for repair or discuss a replacement made to suit the space. Consider how you use the entrance: does it need room for bins, garden equipment or regular deliveries? Would a solid gate improve privacy? Does the opening direction interfere with a path? Answering these questions before fitting avoids daily annoyances afterwards.

What to Include When Requesting a Quote

You do not need measurements down to the millimetre. A few useful details help us understand the project:

• Your town and postcode.
• An approximate length and preferred fence height.
• Whether this is a new boundary, a replacement or a repair.
• The fence style you like, if you have one in mind.
• Photographs showing the full area and any damaged sections.
• Details of access, steps, slopes, trees or existing paving.
• Whether an old fence needs removing and taking away.

We can then discuss suitable options and arrange to check measurements and ground conditions where necessary. A clear quote should identify the materials and work included, particularly posts, boards, gates and disposal.

Garden Fencing Greasby: Budgeting for Your Boundary

Knowing a starting price helps you plan, but the final cost should reflect your garden and the work required.

Standard panel fencing starts from £125 per section. This guide is based on a 1800mm × 1800mm timber panel with concrete posts, including removal and disposal of the old fence.

Picket fencing is approximately £80 per linear metre, supplied and fitted.

Bespoke timber fencing, gates and repairs are quoted individually. All prices are rough estimates, subject to a site survey. We confirm the materials, any gravel boards, access arrangements and removal work in your quotation.

Frequently Asked Questions

What should I send you to get a fencing quotation?

Send your postcode, photographs of the boundary and an approximate length or number of sections. Mention your preferred style, any gate requirements and whether the old fence needs removing. We arrange a visit where measurements or ground conditions need checking.

How quickly can you install a new fence?

As a working guide, panel fencing takes approximately one hour per section. A two-person team can typically install around 20 linear metres of picket fencing per day. Difficult access, old-fence removal and ground preparation can extend these estimates.

Does your price include taking the old fence away?

Our standard panel fencing guide price includes removal and disposal of the old fence. For other installations and repairs, the quotation confirms what waste removal is included, so you can compare the full scope of work.

Can you fit fencing around an awkward gate opening?

Yes. Standard panels do not suit every gap, corner or entrance. We can quote for a made-to-measure timber section and a matching gate, with suitable posts, hinges, a latch and any agreed locking hardware.

Do I need a completely new fence if some sections are damaged?

Not necessarily. A damaged panel between sound posts may only need replacing individually. Where posts have failed or several sections are unstable, more extensive work may be appropriate. We assess the remaining structure before recommending a repair, partial replacement or new fence in Greasby, Frankby, Irby or Upton.

A Boundary You Can Feel Good About

Garden fencing affects how your outdoor space feels every day. It frames the view from your windows, provides privacy where you need it and helps keep the garden usable. Small details such as a straight finish, sensible gate position and secure posts make a visible difference.

Merseyside Fencing works across Greasby, Frankby, Irby, Upton and nearby Wirral neighbourhoods. If your fence needs attention, tell us what is happening and what you would like the finished boundary to achieve. We will help you choose a workable solution and provide a free, no-obligation quotation for fencing installation or repairs.